A detailed look at how well the CB-6000 and its smaller sibling perform for teasing and titillating users

CB6000/CB6000S … devices to tease and titillate

Construction The rings and spacers are identical for both models, though I’ve spotted some inconsistency in casting quality. Certain pieces have noticeable seams that can create discomfort; a bit of sanding with wet-and-dry paper usually fixes this. Cages: Each cage consists of two halves sonically welded together. While generally robust, the weld points themselves are quite small, meaning pressure inside is concentrated over these smaller areas, which could potentially cause splitting. The internal seams in both cages feel very smooth and hard to detect externally, but where the spacer connects on the outside, they’re a bit rougher. I also noticed that if the opening faces forward, there’s a risk of a sharp edge forming here as well—another spot for light sanding.

The CB6000 cage seems more prone to breaking in my experience. I believe this is because its longer length allows average penile expansion, putting greater stress on the entire structure. I’ve already snapped two cages and keep an extra one ready just in case. The shorter CB6000S, by contrast, appears tougher against breakage since it limits erection potential, reducing force on the cage walls. I’ve worn this shorter version for much longer stretches without any seam failures yet.

Comfort Rings and spacers: Fitting is crucial here. The ring and spacer need to be snug enough with minimal gap so you can’t slip out voluntarily, but not so tight that they cut off circulation or harm the testes and penis over time. I’ve tried two setups, both of which worked well. Each cage requires individual assessment based on how much penile flesh it holds. For me, a smaller ring paired better with the CB6000 for comfort, whereas the CB6000S needed one size larger when used with a spacer; however, I could use my smallest spacer option with either. Don’t forget to lubricate underneath the cage where it presses against your testes and at the base of the ring. Skipping this might lead to pain, especially since your urethra rubs along the bottom edge of the ring. A ring that’s too tight can also hinder urine flow and cause issues later on. Cage: Once you’ve got the right combination of ring and spacer, both cages feel great. When I first started using the CB6000, I’d apply silicon lube to my penis before slipping in—it took a bit longer but was easy and pleasant. Over time, however, I realized that while comfort was excellent, too much lubrication let my penis move freely, which actually encouraged more erections. Pleasurable? Yes. Optimal for chastity? Not quite. I switched to the stocking method and found it superior. After inserting through the tube front, I used a cotton bud to add lube inside. This worked better because only the head could shift now, improving comfort significantly. Both cages felt improved with this technique, but beware: ensure excess skin isn’t caught in the tube’s opening. Pull any loose skin out by holding the shaft steady while fitting the cage. Long-term wear suits both well, though I prefer the CB6000S for its stronger restriction of erections. Nocturnal ups are noticeable with the CB6000 but remain moderate; however, even small rises in the CB6000S can bring sharp pain and that sensation something might … pop.

Cleaning Cleaning methods align closely between the two models. First priority is removing as much urine as possible after peeing if you carry cotton swabs along—it helps immensely. Once done, gently squeeze behind your testes toward the base of the penis to massage out residual drops. Creating a small gap beneath the ring lets excess escape more easily. Some liquid often remains; failing to clear it entirely increases chances of wetting yourself shortly after dressing. Standing up post-urination tends to help extract those last bits best, since shaking isn’t really an option in these belts. I then dry everything thoroughly using toilet paper and cotton buds until no moisture lingers inside. Too much trapped urine can cause a burn akin to nappy rash. If possible, dab some lubricant onto the glans after drying. Personally, I don’t carry cotton swabs because they unravel easily in pockets where I work (no bags allowed). Instead, I roll one or two squares of toilet paper into tight tubes and slide them through the cage head, rolling around to clean effectively—just ensure you keep the direction consistent otherwise it unravels messily.

During showers, I rinse both rings and cages as much as possible, though directing water fully inside remains tricky. Avoid excessive soap during cleaning since contact with the urinary tract can sting. Post-shower drying involves plenty of air-drying followed by a cotton bud wipe-down within. Usually, I skip extra lube unless heading to bed or leaving for work—in which case I apply small amounts near both ring bases and penile head. Overall, both are straightforward to maintain, with the CB6000S having slight advantages due to smaller size allowing easier access via standard swabs. A quick note regarding comfort care: watch out sitting directly on your testes; it happens more often than expected and hurts!

Wear duration (between cleans) Since neither model permits full washing without removal, I take mine off roughly every three days for deep cleaning. This break also gives the penis time to rest and breathe while allowing health checks. Extended wear works fine too, but after nearly seven continuous days, odor builds up noticeably requiring a changeout.

Style Visually appealing devices that hug around testicular bases fully enclosing the shaft naturally complement body lines. Regarding visibility under clothes: both fit comfortably day-to-day without drawing attention. The CB6000 creates slightly fuller pant curves but hasn’t drawn comments yet, while the shorter version hides even better beneath fabrics. I wear lycra swim trunks daily since they support movement restriction nicely—a habit predating my entry into chastity that enhances sensation further. Always sporting at least one piece of LLL (lycra/leather/lace) keeps reminding me of my kinkier side.

Fit Adjustments aside, both sit securely once sized correctly. Longer fellows might lean towards the Cb6000 for better accommodation; shorter men may find CB6000S preferable.

am bigger than average I started wearing a Cb6000 cage. This is very comfortable and less constricting. For me, the point of a chastity device is to minimize erections and discourage playing with myself. I decided to get a Cb6000S cage as it looked more restricting, and it certainly is. Wearing the CB6000 cage I can fill the tube right to the end which although is very satisfying, it also didn’t serve to discourage erections. Wearing the CB6000S on the other hand, my penis fills the tube at all times, and the tube serves to compress me and always be a constant reminder of what I am wearing. Whilst wearing the CB6000 you can really forget it is on, but with the CB6000S, you always know it is on. Measurement issues With these devices, you are never really going to be able to measure yourself accurately to ensure you pick the best size cage. Rings and spacers on the other hand are not a problem given you are supplied with a variety in the case. I would honestly say if you are of average length, get the CB6000S as you will probably enjoy the sensation it provides. If you are more than gifted in the length department, maybe get the CB6000. I did find that after constantly wearing a CB6000, my penis was more accepting of the smaller cage and going to a CB6000S still felt comfortable. I haven’t worn a CB6000 cage in a while now and will probably not return to one to be honest. Security Pad Lock: The devices are made to be secured by a small padlock and come supplied with a Masterlock brass padlock. If you receive another brand padlock, the device may not be genuine; but as with any business operation, the manufacturer could alter the supplied lock at any time. If however the lock supplied is a WolfDog brand, you device is almost certain a fake. Securing the device with a padlock is dead easy as the hole in the white pin seems to be just the right size. My only concern is that once the lock is secure, you can experience a clunking sound whilst walking around where the lock taps the top of the cage. To combat this, you can either wrap something around the brass portion of the lock, rubber bands or sticky plaster seems to be common, or find a rubber coated lock. Plastic Numbered Tags: The other option is to use numbered plastic tags. Whilst this idea is fantastic as it allows any potential key holder to check the unique number of the tag on the device, these little tags can be expensive. They are also not foolproof as I found out one day whilst moving the device to apply lubricant; the thin part of the seal snapped. If you are concerned about this occuring as the result of a genuine mishap, it can occur. If you intend on travelling or being away from the key to a padlock, this is a convenient option as release is mere seconds away. It is also the best way to potentially travel by airplane and could pass through customs BUT there is no guarantee with all the modern body scanners available nowdays. Other methods: One of my favourite methods to ‘lock’ the device is with a tiny electrical cable zip tie. If it small enough to go through the hole and can be tightened so there is no slack. Given the abundance of these zip ties, they are cheap. But what about security you ask? Whilst they can be cut off easily, they are also generally wide enough for something to be written on them, particularly on the inside where the pawl mechanism is. Pull out: Once you have settled on the right ring and spacer combination, security is the next consideration. I did find that whilst wearing the CB6000, I was able to pull out more easily and remove the device totally. I solved this by going to a smaller space and ring. Whilst I can still theoretically pull my penis from the tube, I am unable to get it back in. With the CB6000S, I thought security would be more of a concern, but to be honest, I find it more secure given the fact that the device is smaller and more constrictive. Pulling out is harder for me in the device as I have found a ring and spacer combination that works well. If I wished to pull out of either tube, I can be done with some effort but putting a penis back in is much harder. To be honest I cannot see the purpose of wearing the cage if all you can think of is taking it off. You need to adjust your mindset to understand why you are wearing a CB device and that removal of the device is not an option unless for specific reasons. You are able to get various security add-ons for the CB6000 series of devices but if it got to the point of needing them, then I think it is worth considering moving to a full metal device which is custom made and provides ultimate security. My CB6000S is more secure than I need and provides me time to stop and think whenever I try and access my penis. It is a barrier to physical touching but will never be a true barrier as the device can always be removed if required. Conclusion These CB6000/s cages are great entry level devices to anyone wanting to start playing with chastity. Whilst they do cost a fair amount, the price is usually less than a custom metal cage device, and certainly less than full belts. Whilst many other competitors have arrived in the market offering similar devices made of poly-carbonate, silicon and other substances, the products from ALE tend to be more well known and have good support from the manufacturer. Like anything you buy, you have to be happy with the product and for the price, I am happy. My only word of caution is to be wary of counterfeit devices which seem to be flooding the market. They may appear to be the same and function the same, there is always the possibility of a problem with the construction or the quality and composition of the materials used. If you have made it all the way to the end, thank you for reading. Please remember that this review is based on my personal experiences only and any decision you make about wearing or buying a chastity device is entirely yours alone. If you buy a device based on what I have written and have problems, then you have my sympathies but remember that you chose to buy it. As always, read as much as you can about chastity devices, chastity play and safe use before you begin on this path. Engaging in chastity/orgasm denial can be a fun thing whether doing it by yourself or with a partner. Remember that once it stops being fun or something you choose to do, remove the device and re-evaluate. Bound4Fun Last updated: March 2015. (C) 2011-2015 REPRODUCTION OF THIS ARTICLE IN ANY FORM OUTSIDE THIS FORUM IS PROHIBITED UNLESS YOU HAVE MY EXPRESS WRITTEN PERMISSION OR SUITABLE GIFT OF MY CHOOSING. EMAIL ME FOR MY WISHLIST.;)