Chastity device reviews discussion

Wow, I placed the order Thursday night and my HT showed up Monday. It was perfect timing since it was shave day (I do this every two weeks). I washed everything thoroughly.

Initially, I had to place the ring upside down and then rotate it because where the tube fits was poking me. This is my first ergonomic ring. I started with a 50 mm size. Being high & tight makes me a bit of a challenge for these devices. It seems impossible to pull out since the tube has a roof that extends toward my body. The small-sized tube is also narrower and shorter, so I hope this prevents me from having sex while wearing it.

It’s been three or four weeks now, and Lust is building up nicely. So far, it feels very comfortable and light. The lock runs quietly too. My scrotum feels tighter because the tube sits lower down relative to the top of the ring.

After an hour in, I started feeling burning issues at around 4 o’clock and 8 o’clock positions on my skin. I applied baby oil with a swab while checking, and discovered a nasty little corner where the left side of the tube contacts my scrotum. There are three lines resembling mold marks on the bottom of the tube. I fixed that corner using an emery board. This resin material is quite easy to work with. The testing continues.

An hour and a half later, discomfort started in my left testicle (cracker). I went to the bathroom for the first time and lost one while going. I unlocked it and put on a smaller ring (45mm). It was good for the rest of the night until morning when I removed it for work. I forgot what it felt like back when one of the Fellas was sneaking out. The smaller ring seems perfect so far.

Oh, while going in for my naked after-dinner nap, I noticed that the cute little Abus lock was scraping pretty badly against the sheets. I filed down all the bottom edges and corners since they were sharp. It’s much better now. Tweak as we go.

After two days, I felt confident enough to give the keys to Mrs. Keyholder.

I had a hot shower last night with the HT still on. Unlike my metal devices and CB 6000S, even though everything loosened up and got floppy, I still couldn’t pull out due to the snug fit and the hood going over the top of my shaft toward me. The pictures show this extra section that other tubes don’t have. I also like how they undercut the bottom of the tube so there’s no extreme frontal scrotum impact as I’ve experienced with other trapped ball devices, especially since I’m compact (high & tight). A lot of real thinking went into this device—it’s Swiss, are we surprised?

When I put on the main ring, I turn it slightly so the oval shape is vertical. It makes it easier to get both Guys through before the Shaft. I don’t wear chastity devices to work, so usually, my longest HT stint is Friday afternoon to Monday morning. Longer for holiday weekends and staycations.

Hygiene is a bit of an issue because the tube fits snugly widthwise (I got the small size tube) and my shaft doesn’t get much air compared to when Queen’s Keep wore it.

I have always used 1 7/8 inch rings. The 45mm is slightly bigger than 1 3/4” and the 50mm is a bit smaller than 2”. That’s why I bought both sizes. It turns out the 45mm works, which is good since they don’t stock 47mm. Thank goodness for conversion widgets. If anyone needs a 50mm ring, I have one (white).

The device is comfortable, lightweight, quiet, and so far very secure (I’ll keep testing, hehe).

Took a few weeks off due to Spring Stuff. Now I’m back in for the 2013 Memorial Day Weekend. In on Friday afternoon and not out until Tuesday morning for work. Need to do a month or more since that’s when I get too Lusty and defeat these devices; it’s not about pulling out, but having an orgasm which means they become dust collectors after that.

Got woken up at 6 am with the morning stiffy. The ring was burning. My foreskin was sticking out of the two top ventilation holes. Did a bathroom stop and used a Q-tip to oil and push the skin back into the holes. Unlike metal cage devices, I think the Trainer will have to come off for cleaning after a few days because the solid tube is filled with me most of the time in the top half. Since the ring has a larger gauge than my metal rings, it’s more comfortable, but I also think it might be causing more burning which requires more lubrication than the metal devices I’m used to.

Yesterday I pushed and shoved in lusty mode but got nowhere except for some pre-cum coming out of me. Good so far.

I also wish the slot at the end of the tube went down a little further. I end up with urine pooling at the bottom inside the tube no matter how much I shake it. I clean up using a Q-tip and tissue.

The next night, I slept through without any problems.

Have had the HT on since Friday afternoon. Sunday afternoon saw my skin getting burnt on the bottom half of the ring. I oiled and moved the skin around numerous times while doing yard work. Finally, I couldn’t take it anymore and asked Mrs. Keyholder for the key. Took advantage to get a thorough cleaning & shave. Noticed that where the burning was located was stretched skin on my scrotum. By the time I finished cleaning & shaving, the stretched skin had returned to normal. Checked the ring for any imperfections and found none. Reinstalled the ring, pulled forward all available skin, and got secured again after oiling as I went along. Perfectly normal and comfortable now.

It should be noted that the HT is not faulty; I’m high & tight, and it’s been cool here in New England so The Guys want to retreat. I put the HT right back on to continue testing for security so I can complete this review. Will remain in the HT until Tuesday morning when I return to work. It will go on every night after work till morning and continuously through the weekends. Looking at a month for this test because after about 1 1/2 weeks, Lust really builds up, putting both the security and effectiveness of the HT to the test. I hope it passes; so far, I am happy with the fit, sizing for compact me, and ease of installation.

After doing that on Sunday afternoon, the burning returned in half an hour. Oiled and rearranged things again. Took a long hot shower later, and sure enough, when things got warm down there, the burning went away. Also, I took a 2 or 3-week break prior to this Chastity Run so everything is not stretched out yet. When the weather gets warmer and I stay in the HT to stretch things all should be well. Hope so as I have High Hopes for this device.

On Sunday after staining the deck, while readjusting & oiling the HT because I was getting burnt again on the bottom half of the ring, I later started feeling pain down there that I recognized: losing a cracker (testicle). Removed the HT very disappointed. Measured the 45mm ring. It seems to be 2 inches wide and 1 7/8” high. My standard is a round 1 7/8” ring. May have to get a 40mm ring instead. Good Grief.

It’s May 27, and I just ordered the 40 mm ring for the HT (a white one). This is the last chance to make this device work since there are no more rings to order or options available. Spent $74.32 total. For those wondering, shipping was $20 to US as opposed to $25 when buying the whole unit separately before with an extra ring (shipping also $25 then).

For now, it’s back into some stainless steel to keep this Chastity Run going. Don’t cheat, don’t cheat. Hope the smaller ring fits and works. Darn it……….

It’s Thursday, and the 40mm ring has arrived. It’s very hot here today so things down there are loose. Put it on OK. For those concerned with measurements of the smallest ring, it is 1 3/8 inches high by 2 1/8” wide. I have possession of the key as things could get interesting overnight. Oiled a lot before installing, and my scrotum has that “football” look to it but feels comfortable. Only time will tell if the HT works for me.

After about an hour in the 40mm ring, noticing since pulling everything I could through it is that, in a restful state, my shaft sits more into the tube than before. This is different.

The HT stayed on all night with no problems using the 40mm (smallest) ring. When removed in the AM for work, something swelled up. Perfect. Now begins the Friday afternoon to Monday morning test. Hopeful for success.

Sunday morning and all is good. Little burning from morning swelling but did a bathroom stop after getting up and everything settled down. It’s been almost two weeks in this Chastity Run so hormones are present, but I can do nothing about it. Can’t pull out and can’t have sex with the tube on.

Oh, this is exactly how the device is supposed to be.

I’ll wrap up this review and share it across the usual spots as soon as I get a moment. After several months have passed, I’m hopeful enough to call this device The One.

I took off the HT following a standard weekend with no harm done to me from wearing it.

That’s all for now. Hopefully my measurements of various rings prove useful for anyone thinking about getting the Holy Trainer. The 40mm ring stands 1 3/8” tall and is 2 1/8” wide. The 45mm ring measures 1 7/8” high by exactly 2” across. (For sale) The 50 mm ring comes in at 2 inches high by 2 1/4 inches wide. (For sale)

Pros: The Penis Tube design is excellent. It extends upward toward the body for better security, and the bottom cutaway reduces scrotal impact, which is ideal for ‘high & tight’ types. The ring’s ergonomic shape feels spot on. The device operates quietly; there’s no clanking noise from the lock sound. The Bio resin material has a distinct feel. It suits compact builds well and is difficult to escape (I certainly can’t). I haven’t tried the larger tube size though. Because the HT points downward, it remains discreet under clothing.

Cons: The real dimensions of the rings (which are oval) aren’t listed on the site, making selection tricky (hope my data helps). Others have reported tears in the clear tube, but I haven’t had that issue myself. I wish the urination slot was positioned slightly lower (could just be due to my build?).

That’s it.