Mature Metal discussion

member_f44200464f · 2026-08-30T17:36:08.000Z · 0 replies

Reply
member_f44200464f New member Thread starter
Posts
1
Joined
Jan 1970
2026-08-30T17:36:08.000Z #1

This is my first review ever written here, so please be patient with me… I have had a CB2000, CB6000, and a Birdlocked in the past, but none of those gave me what I wanted from a chastity device – specifically, it needs to fit tightly yet comfortably, not create a noticeable bulge, stay easy to clean, and handle long-term wear without problems. Mistress Lori’s devices were seriously on my mind for quite some time, though they always seemed out of reach financially. So following an unsatisfying experience with the Birdlocked, I chose the Jailbird from Mature Metal instead. I started off with a 45mm round base ring and picked the smallest gap available between the cage and that ring. The result was that the base ring chafed me badly, and because there wasn’t enough room for my scrotum, oedema set in where the bottom of the cage dug into my skin. I returned it to get modified – swapping up to a 50mm oval base ring with a longer gap between components; I also added an upgrade to their anti-pullout system as well. The anti-pullout setup uses three pins – two feature cross-hatching and one has a duller tip. Just slide the pin you (or your mistress) prefer into place right before inserting the main locking pin, which is very straightforward, then secure it with the padlock. Getting pulled out is actually possible even when using the longest pin, but only if planned carefully. One method involves pulling up a nice fold of skin on top of the penis while putting the pin in. When you try to pull out later, that folded skin acts as a cushion so your glans doesn’t scrape against the device too harshly. The trick is inserting the pin without stretching the skin tight. Not only does the pin press down firmly but gently (unless you get an erection), it makes dragging the head of your penis past it extremely painful. Even if you succeed, slipping back in unnoticed becomes nearly impossible. After trying various setups, I now wear a heavy PA ring for extra security that requires piercing pliers to open. It locks around one bar of the cage structure, meaning pulling out would require removing my piercing first before even dealing with that dreaded anti-pullout pin. The finish on this device is excellent – clearly made with care and free from rough spots entirely. The gentleman at MM was always polite and quick to answer all my questions and concerns during purchase preparation and afterwards too. In short, I strongly recommend both the Jailbird model and Mature Metal overall. Their service levels were outstanding, giving me a custom-built, highly secure durable device for just about what two cheaper cages would cost combined. Hopefully MM continues growing stronger and helps more of us guys (and sissies) remain securely chaste under our Owners’ watch. curtseys sissy peaches xxx

member_b578de6dc4, member_3328c6a1d9 and 4 others

Share Quote Report

Write your reply

Preview

You must be logged in to post. Reading the boards never needs an account. 18+ only, non-explicit, and civil. The full board rules are short.

More in Finding a keyholder

  1. Journals and blogs discussion
    member_654b9daad4 · 2026-08-30T19:16:23.000Z
    Replies: 0
    2026-08-30T19:16:23.000Z member_654b9daad4
  2. Introductions discussion
    member_1eabeb9052 · 2026-08-30T19:08:18.000Z
    Replies: 0
    2026-08-30T19:08:18.000Z member_1eabeb9052
  3. Introductions discussion
    member_024ae4b058 · 2026-08-30T19:04:51.000Z
    Replies: 0
    2026-08-30T19:04:51.000Z member_024ae4b058
  4. Introductions discussion
    member_a2ab55123d · 2026-08-30T19:03:43.000Z
    Replies: 0
    2026-08-30T19:03:43.000Z member_a2ab55123d
  5. Introductions discussion
    member_fea29d6870 · 2026-08-30T19:03:38.000Z
    Replies: 0
    2026-08-30T19:03:38.000Z member_fea29d6870
  6. Introductions discussion
    member_61d0852561 · 2026-08-30T18:41:25.000Z
    Replies: 0
    2026-08-30T18:41:25.000Z member_61d0852561