Chastity and orgasm denial discussion

member_54c27f9d45 · 2026-09-04T22:56:53.000Z · 0 replies

Reply
member_54c27f9d45 New member Thread starter
Posts
1
Joined
Jan 1970
2026-09-04T22:56:53.000Z #1

I hesitated to post this earlier, but on June 1st I decided it was time to make my CB6000 a permanent fixture in my life. Ever since I was about 15 (weird, right? who doesn’t want to masturbate ten times a day at that age?), I’ve dreamed of owning a Neo Steel, Carrara, or Latowski, but money has always been tight for even a used one. So… I picked up some QuickSteel and a piece of MIG welding wire. The wire is quite strong, with a melting point around 2700F and it bonds almost instantly within the QuickSteel. Instead of passing a lock through the hole, the MIG wire takes its place (which also gives me more room, something I definitely need since I want ‘The Curve’ but can’t afford it just yet). Then the QuickSteel goes over everything, bonding to both the plastic and the MIG wire, creating a solid seal so the CB6000 never comes off. I’ve also added an extra ring; instead of one behind my testicles, there are now two (see pics), which makes it incredibly comfortable even when 10 inches tries to stretch that 4-inch hard plastic tube… I only told one friend because I know he’s into this kind of thing. On July 1st, he surprised me by tying me down in bed, putting on my sensory deprivation hood, and then I felt a lot of movement as he somehow removed the old layer of QuickSteel. He checked everything, edged me for about an hour, shaved up, and reapplied it all. He added another piece of MIG wire (bringing the total to two) used a different type of QuickSteel that has better bonding properties than what I’d used before, so he says it won’t come off easily. He claims it’s nearly drill-proof (though I hope no drills ever get near me!), and this setup isn’t coming off unless you break the whole thing completely. Since I’m broke right now, I won’t risk destroying it because replacing another one would cost a fortune. Today marks 48 days since my last orgasm. Just wanted to share how things are going. There have been some painful nights and mornings, but overall not bad. It’s easy to hide. Cleaning is relatively simple too; I use large Q-tips and an eye dropper. If I clean daily, I stay just as hygienic as if there were no plastic locked on me.

The pictures showing the white substance inside are lotion applied to help with chafing, which was also present when my ‘friend’ visited.

This method is better than before; previously, I’d be tempted to unlock whenever I wanted. Now, this feels like real chastity. It’s as close as I can get to a proper full steel belt. Though, if given the chance, I might break it off quickly just for the privilege of having a Latowski or Carrara locked on me.

The idea of someone sliding one up and around my body and locking it in place makes me incredibly hard right now. Looking down at the steel and reaching out to feel its cool surface is something I won’t be fully satisfied with until it actually happens. [[Image: FullSizeRender (8).jpg]](the referenced community page) [[Image: FullSizeRender (1).jpg]](the referenced community page)

member_80ddf7d2d2, member_02cde22482 and 3 others

Share Quote Report

Write your reply

Preview

You must be logged in to post. Reading the boards never needs an account. 18+ only, non-explicit, and civil. The full board rules are short.

More in Finding a keyholder

  1. Introductions discussion
    member_7d2582c856 · 2026-09-04T22:49:00.000Z
    Replies: 0
    2026-09-04T22:49:00.000Z member_7d2582c856
  2. Lori Devices discussion
    member_49a2224f88 · 2026-09-04T22:33:39.000Z
    Replies: 0
    2026-09-04T22:33:39.000Z member_49a2224f88
  3. Introductions discussion
    member_e121ce4e40 · 2026-09-04T22:16:32.000Z
    Replies: 0
    2026-09-04T22:16:32.000Z member_e121ce4e40
  4. Introductions discussion
    member_fb658a3beb · 2026-09-04T22:06:57.000Z
    Replies: 0
    2026-09-04T22:06:57.000Z member_fb658a3beb
  5. For sale/wanted (Please be aware of scams) discussion
    member_e4a8df7b10 · 2026-09-04T22:04:38.000Z
    Replies: 0
    2026-09-04T22:04:38.000Z member_e4a8df7b10
  6. Introductions discussion
    member_ef91783fa4 · 2026-09-04T21:59:27.000Z
    Replies: 0
    2026-09-04T21:59:27.000Z member_ef91783fa4